Installation & Help
Choose the proper installation instructions below that correspond to your product.
“Accelerator Ready” Installation (Type 1A)
For grass catcher installation on “Accelerator Ready” mowers with a lip and a hole that do not require a bracket or drilling
More Videos and Help
How to Dump Your Grass Catcher
Demonstrates the two basic methods for emptying an Accelerator catcher.
Stabilizer Bar
The Stabilizer Bar is a product that keeps lighter weight mowing decks, or homeowner grade mowers from tilting when running an Accelerator catcher. They can also stabilize the deck when a vacuum system is in use. They are fully adjustable.
How to adjust the catcher door
Instructions for adjusting the frame or door of a catcher for proper fit.
What catcher do I have?
Guidance for identifying the model of one of our catchers.
Guidance and Warnings
Please use caution and common sense when using our catcher. This catcher is intended for use by people who are physically capable of lifting heavy objects. Do not use this catcher if you cannot safely lift heavy loads, and always use proper lifting techniques. Always follow safe mowing practices. Carefully follow all instructions when using and or installing the catcher. Not following these instructions can be hazardous to you as well as others. Do not attempt to remove to remove or install the catcher until the mower blade(s) have completely stopped moving. Avoid overfilling the catcher. Use extreme caution when mowing on non-level surfaces to avoid potential slippage or tipping. Keep your hands away from the inside of the catcher and do not use the catcher if it is damaged.
WARNING! When the catcher is not in use, the deflector shield assembly must be reinstalled. Additionally, any bracket or adaptor that is obstructing the deflector shield from fully deploying must be removed.
WARNING! Before using the catcher, check the mounting area for any gaps where debris could escape. Also make sure that when mounted, the bottom of the catcher is BELOW the mower blade. If you are unable to get the catcher to mount properly without gapes, or the catcher bottom is riding above the mower blade, call us for technical assistance before using the catcher. Our service technicians will assist in determining the problem and finding a solution. If the problem cannot be resolved to your satisfaction, you may return the catcher for a full refund.